RECON Test Set

The 21st Century Butt Set

Project Detail

Recon_T62-00

RECON Test Set

The 21st Century Butt Set

The RECON is the true 21st century telecommunication line analyzer. It is a field instrument that delivers more information of online conditions & status than any other test set on the market!

Main Features

– Off – hook current and polarity
– On – hook voltage and polarity
– Ring amplitude and frequency
– On – hook and call waiting Caller ID info
– Amplified Line Monitor for volume levels comparable to “off-hook” operation
– 8 number stored memory with Alpha/Numeric tags
– Fuel Gauge Battery condition
– Continuous Polarity Indication
– Caller ID/Call Waiting and Caller ID error detection
– Tone and Pulse dialing
– Configurable Auto Off in all modes
– Detects and identifies DSL and T1 lines
– Last number dialed, redialed or received

Digital Protection

– Detects DSL and T1 lines
– Data Defender™ Data line-in-use capability
– (Data Defender is a trademark of Independent Technologies)
– High line voltage detection with next step options
– Data measurement options
– Active monitor circuitry minimizes load on subscriber line
– DTMF digit detection and display in monitor mode
– DigitView™, DTMF decode sees defects on customer equipment while dialing out
– PwrSave™ circuitry for Extra Long battery life

Other Features

– Advanced data detection & identification
– Large backlit display for low light environments
– Glow-in-the-dark keypad
– 100% Data Safe
– Rugged weatherproof case, IP54 Standard
– Drop Proof (drop tested at 20ft)
– Speaker with fine volume adjustment
– Adjustable earpiece volume, hearing aid compatible
– Noise cancelling microphone
– Microphone mute with toggle On/Off locking feature
– Soft key menu system
– Cushion boot for extra protection
– Backlight 0 to 100% adjustable with On/Off option

PRODUCTS IMAGES

VIDEO

Description

Ordering Information

Download

Ringer EquivalencePulse Dialing In BELL mode : 0.0 (no ringer load)Pulse rate : 10 pps ±10% ;
Make / break ratio : 60% to 40% ±2% ; USA
Interdigit interval : 820 ms ;
Resistance during break : 120K Ohms minimum
Tone Dialing DTMF output (into 600 Ohms) ;
Tone – Frequency error ±1.5% ;
Tone Level :
High group : -6 ± 2 dBm ;
Low group : -8 ± 2 dBm ;
High group vs. Low group Difference (twist) : 2 ± 1 dBm
Flash Duration 600 ±50 ms
Pause Duration Tone : 3 seconds ;
Pulse : 3.4 seconds
Memory 8 programmable locations, 32 digits with 12 character tag, stored in non-volatile memory. Last number redial plus list of last 10 numbers dialed.
Return Loss Minimum 14 dB at 600 Ohms
Line-Current Range 10 to 110 mA
Apparent Line Resistance 270 Ohms at 20 mA
Monitor Mode Impedance DC: 1MΩ typical
AC: 390 KΩ at 1 KHz typical
Measurement Voltage: 0 to 200 VDC ±5%;
Current: 10 to 110 mA ±5%;
NOTE : Do not attach test set to electric-power lines
User Controls (1) Left-side-mounted TALK/BELL/MON push button switches for operating modes ;
(1) Right-side-mounted microphone mute pushbutton ;
(4) Front-mounted pushbuttons for various options ;
(1) Standard front-mounted 12-key phone keypad
Interface Attached cord set
Display Transflective 128 by 64 pixel graphical liquid crystal display (LCD) with LED backlight
Size 21 x 6.4 x 5.1 cm without belt clip and cord set
Weight 511g
Power 4 x AAA alkaline batteries
Battery Life With 100% backlight and in speaker mode – 20 hours
Backlight off and speaker off – 75 hours
Standby – 2 years
Warranty 1 Year

Part Number Product Images Description
P/N : T62 Recon_T62
  • Recon Test Set main unit
  • Cord set: 60″ Bet-of-Nails and patch table

How to Buy

Any product purchased through our authorized dealer would be supported with full after service and warranty service.

Distributors

Register your product