GigTest™ ETHERNET SPEED TESTER

Project Detail

GigTest™ ETHERNET SPEED TESTER

The fastest, easiest and least expensive way to guarantee up to 1 Gbit speed on ethernet links within a network.

Testing and measuring key data link operations is necessary to determine the speed capability of individual CAT 5/6 links within installed LAN network systems. With the push of a button the GT1000 GigTest Speed Link Qualifier automatically measures key metrics like Signal to Noise Ratio and Skew as well as generating a Bit Error Rate Test (BERT) that generates data packets for transmission and receiving along a link to see both error generation and/or noise interference effects that may impede data flow at the highest possible level. No interpretation needed. All tests transmitted via Wi-Fi for storing results in a spreadsheet format. On board Red and Green LEDs for instant clarity of speed conditions

Main Features

– Wireless reporting of results to mobile devices or laptops
– One ended Cable Test: Detects wiring issues or bad connections per TIA568 A/B
– Linked Speed Indication: Green/Red LEDs showing speed link rate at each level, IEEE 802-3
– Skew Test: Measures Time domain differences between pairs which can cause data errors, IEEE 802.3
– Signal to Noise Ratio: Detects and measures electronic noise, both ambient, alien and internally generated, per IEEE 802.3
– Bit Error Rate Test (BERT): Generating/receiving actual data packets at Gbit speed, receiving and measuring time and accuracy, per IEEE 802.3. Two units needed.
– Long BERT Mode – 10 times as long as a standard BERT test : Generates sustained BERT packets to help detect spurious/impulse noise which can result in data error re-transmission effects

Other Features

1 UNIT TEST : SKEW + Signal to Noise Test = Ethernet Speed Qualification
2 UNIT TEST : SKEW + Signal to Noise Test + BERT Test = Ethernet Speed Certification

PRODUCTS IMAGES

VIDEO

Description

Ordering Information

Download

Battery Life 6X AA alkaline batteries, 9VDC nominal, 2,200 mA-hr (typical)
Linked -7 hrs typical,
Not linked – 30 hrs typical
Standby 1.5 years typical
Altitude 10,000 ft. (3048 m) operating
Temperature Operating 32 to 122 degrees F (0 to 50 C)
Humidity 10 to 90% non-condensing
Enclosure High Strength ABS V0 plastic with boot
Size 1.85” H x 3.6”W x 6.8” L (4.7 x 9.15 x 17.3 cm)
Weight 18 oz (510 grams)
Safety Compliance CE

Part Number Product Images Description
GS1005  

Remark: The picture above is for reference only.

Two pack kit for two ended BERT testing

How to Buy

Any product purchased through our authorized dealer would be supported with full after service and warranty service.

Distributors

Register your product